Speaker selectors are essential tools for a live event. They allow organizers to pick the best speakers from an extensive list to entice attendees and provide them with unique content. These lists can be found on websites like SpeakerDeck or Eventbrite, but people may want to upgrade their speaker selector in order for it to compete with others in the market. So what does this mean for those looking forward?
An audiophile’s ideal is to have their favorite music playing throughout the home. This multi-room audio setup seems complicated, but it is pretty straightforward. You may freely distribute audio via speakers around your house thanks to a device known as a speaker selector. The speaker selection divides and delivers the audio signal from your amplifier or receiver to two or more sets of speakers. It’s a passive device that utilizes the receiver’s power to power connected speaker pairs. All you have to do is click the receiver’s or amplifier’s speaker output terminals and each pair of speakers to the rear of the speaker selector via speaker wire. You’re ready to go after you’ve created the connections.
Speaker pickers typically enable you to connect two to six pairs of speakers. There are, however, a plethora of speaker selection options accessible, which may cause you to get confused when buying. This article will assist you in finding the most exemplary speaker selector by introducing you to the many kinds of speaker selectors and some of the factors to consider when purchasing this sort of audio equipment.
Types of Speaker Selectors That Work Best
Understanding the many kinds of speaker selectors on the market can assist you in selecting the ideal one for your requirements. For example, a conventional selection without volume control and a speaker selector with volume control are the two types of speaker selectors.
Speaker Selector in the Old School
The identical audio signal and volume level are sent to all speakers via a typical selection. The receiver’s master volume controls all speakers, so if you decrease the receiver’s story, all speakers’ volumes will be reduced. This is a drawback since you can’t adjust the level of one speaker without influencing the others.
On the other hand, a classic selector may operate each pair of speakers independently. All you have to do is place a volume control device in the room where those specific speakers are placed. Because you can switch each speaker on and off as needed, this is an instrumental configuration. You may leave the receiver on a preset setting and adjust the volume in a different room.
Speaker Selector All-in-One
This speaker selection with built-in volume is available to make things easier. If you go with this configuration, you will get many benefits. You will be able to manage the importance of your speakers separately, but you’ll also be able to do it from a central place. You will save time by not having to go from one room to another. It will also be less expensive since you will not need to purchase volume controls for each room. On the other hand, some individuals like to regulate the level from the same room as the speaker since they can immediately hear whether the sound reproduction is what they desire. Another minor disadvantage of this design is that, in comparison to the conventional setup, the speaker selector may have a higher beginning price.
Essential Factors to Consider When Choosing the Best Speaker Selectors
A speaker selector is a fundamental piece of audio equipment that is straightforward to set up. However, to bring home the most significant speaker choice for your specific needs, there are a few factors to keep in mind.
The number of speaker pairs is the number of speakers in a team.
Speaker selectors have a certain number of speakers you may connect to, which you should consider long before you start looking for the best. The pairings are usually in even numbers: two, four, or six. The 4-way selector is the most popular consumer option, and it may be hooked up to four zones, but be careful not to exceed your receiver’s capability. When you have two pairs of speakers with an impedance of 4 ohms, the 2-way selectors come in handy. A 2-way selector is essential because two pairs of 4-ohm speakers are too much load for most amplifiers. If you have a lot of speakers or rooms to connect, the 6-way, 8-way, or 10-way speaker selectors might be beneficial. When employing these selectors, however, impedance protection is critical.
Power Output of the Receiver or Amplifier
One of the first things you should look for in a speaker selection unit is its power management. Don’t assume that all amplifiers and receivers will operate with all speaker choices. The power of a speaker selector is measured in WPC, or watts per channel. Most speaker selectors, as a rule, don’t operate well with high-powered amplifiers. Some versions are only rated to 60 WPC, while others are rated to 100 WPC and 120 WPC. The peak rating, which may reach 200 WPC, is sometimes listed by the manufacturer.
Circuitry for Protection
Starting with the 4-way model, speaker selectors are frequently provided with some amplifier protection. Due to a low load impedance, the circuitry protects the amp or receiver from overloading. A series resistor and an impedance matching transformer are the two significant technologies utilized for this.
On lower-cost speaker selectors, a series resistor is more frequent. The resistor is connected with the speakers to ensure that the overall circuit has the lowest possible resistance and to protect the amplifier. The disadvantage of this configuration is that the resistor tends to heat up at higher volume levels. If you choose this form of protection, ensure sure the speaker selector has air vents to allow some of the heat to escape. A switch may be used to turn on the series resistor. When you’re utilizing several speakers, you may turn it on. If just one pair of speakers is used, the series resistor may be removed, allowing for a direct connection with minimal energy loss.
Higher power, higher cost speaker selectors often use an impedance matching transformer. It functions by multiplying the impedance of each speaker so that the total impedance is bumped up to the same rating as any of the individual speakers, as long as the speakers are all at the same impedance rating. For example, a 4-way speaker selector with an impedance matching transformer will multiply each 8-ohm speaker so that the total impedance still stands at 8 ohms and is not reduced. Speaker selectors with this type of protection don’t have a switch to control the transformer; instead, it is built-in and ready to go anytime.
Other Things to Think About
Aside from the significant concerns already mentioned, there are a few additional small details to keep in mind. First, depending on the model, speaker selectors are linked via varying wire gauges. You’ll save time and money if you know the speaker’s wire gauge is compatible with the selection. Before buying a speaker selector, make sure you have a location to put it, particularly if you want to connect it to six or more pairs of speakers. Because this kind of speaker selector may be pretty lengthy, it will not fit in a conventional audio rack. Instead, find a shelf or a table that can accommodate the unit’s width. Identifying the position of your speaker selector may also assist you in determining the length of speaker wire required.
In 2022, the top 15 best speaker selectors will be revealed.
1. SSVC-6 Speaker Selector
Known for its innovations in premium whole-home audio solutions, Niles delivers products that give its consumers simple and easy access to home entertainment. With over 50 years of experience, Niles is now creating audio solutions that can integrate seamlessly with lighting and climate control. The company is headquartered in Carlsbad, California, and is dedicated to satisfying the daily lifestyle and business needs of millions of consumers worldwide. The SSVC-6 Speaker Selector is most suitable for homeowners looking to install speakers throughout the house. This audio equipment will allow you to control each pair of speakers independently. It also offers Circuitry for Protection so that your receiver or amplifier can run safely, even when all speakers are turned on.
Design and Construction
The Niles SSVC-6 Speaker Selector is a multi-purpose speaker selector with volume controls built-in. Although, there 6 speaker pairs available. This black audio equipment has a 12-step volume control. It also has on/off controls that may be used to turn each speaker on or off as required. The speaker selector’s chassis is composed of a tough all-metal design. It has Feet that don’t slip to prevent scratches on your floor and other furniture. The rubber bumpers also help to keep the device stable when it’s in use. This model has labels for each control, allowing you to quickly identify which switch controls which speaker. The weight of this item is 9.55 pounds, and its measurements are 17 inches wide, 2 inches tall, and 9.25 inches deep.
Performance and Strength
With a max power output of 200 watts, this speaker selector can handle up to Per channel, 100 watts. The maximum volume attenuation is 54dB. This device has a built-in impedance-matching transformer that can amplify the impedance of the speakers, allowing your amp or receiver to operate safely even when all six speakers are on at the same time. To be compatible with all amplifiers, it features separate left and right ground pathways. The screwless connections on this item are detachable and can handle up to 14-gauge speaker wire.
Specifications
A ten-year warranty is included with this device. A speaker selector with volume control, 72 adhesive-backed room identification labels, installation, and operating instructions, and a warranty and registration card are all included with your order.
Pros
- 100 watts each channel, 200 watts peak
- For six-speaker pairings
- Volume control with 12 steps centralized
- Label each room with its name.
- Wire gauges of up to 14
- Impedance magnification circuitry is built-in.
- Warranty of ten years
Cons
- Even the most discerning audiophiles may not be satisfied with the sound reproduction.
2. SSVC6D
For high-quality home and commercial audio products, Optimal Speaker Design is a company you can trust. Ranging from simple in-ceiling speakers to whole-house audio systems, this company designs, engineers, and distributes its own products. Supported by their US-based research and development team, their products are stylish and cutting-edge. SSVC6D is a product that combines the latest technology with ease of use for a quality sound experience.
Design and Construction
Because of its functionality and low pricing, the OSD Audio SSVC6D Speaker Selector is one of OSD’s most popular models. This selector is equipped with functionality seen on pickers costing almost three times as much. This selector’s body is composed of a high-quality metal cast design. The dimensions are small enough to fit on most table surfaces. This is a dual-source, 6-zone speaker picker that lets you choose which zone to listen to and at what level. You may select between two audio sources using the master A/B button on the front panel. This device also has volume control knobs to increase or reduce the level of each speaker, using the same technology as the in-wall volume controls. This device weighs 8.35 pounds and measures 16.7 inches by 10.2 inches by 2.5 inches.
Performance and Strength
The SSVC6D has a power output of 300W and is compatible with all high-power amplifiers. This device is ideal for both residential and business usage since the audio generated in each listening zone is of constant quality. It is additionally safeguarded by impedance-matching frequency circuitry, which avoids overheating and damage to your amplifier or receiver. The selector’s left and right commons are segregated, allowing it to function with a wide range of amplifiers. The frequency response of this device is 20Hz to 20kHz, with a maximum total attenuation per zone of 42dB.
Specifications
To alleviate irritation while connecting several speakers, this speaker selection has a detachable phoenix connection. This heavy-duty connection may be disconnected from the back panel, allowing you to simply strip and re-insert the appropriate wires. The connection can handle speaker wire up to 14 gauge. Each on/off button is grooved for unique labeling for enhanced convenience.
Pros
- The power output of 300W
- Frequency response: 20Hz to 20kHz
- Total attenuation is 42dB.
- Dual-source, 6-zone
- Volume control on an individual basis built-in
- A detachable connection is included.
- Impedance-matching circuitry protects it.
Cons
- Instructions are unclear in the manual.
- Speaker wire entrance and little screws
3. PSPVC6 High-Power Stereo Speaker Selector
Founded in the 60s as a manufacturer of premium advanced woofers, Pyle now enjoys international fame for their diverse range of award-winning products. Pyle PRO is the subdivision of Pyle that is responsible for audio equipment. They introduced the PSPVC6 High-Power Stereo Speaker Selector to the market. This high-quality selector lets you connect up to six separate sets of speakers to your stereo receiver or amplifier. It is designed with a convenient control center so you can manage the volume for multiple rooms from one location. Enjoy the flexibility of listening to multiple speaker pairs simultaneously.
Design and Construction
The Pyle PSPVC6 Speaker Selector has two stereo amplifiers as its sources. It may be used with up to six different speaker sets. With a sturdy and resilient housing construction and a cabinet heatsink, this device is built to last. Each speaker has its own volume control knobs, as well as a master on/off switch. To turn on all speaker pairs, push the button once, then press it again to turn them off. To select the source, the machine also contains an amplifier A/B selection button. When connecting this selection to the speakers, you may use speaker wires up to 14 gauge. Because this selection splits the power from the receiver or amplifier to the speakers in a unique way, it’s a good idea to examine the Impedance Chart on page 4 to learn more about how to make the optimal connections. This item weighs 11.39 pounds and has dimensions of 16.92 inches wide, 6.29 inches long, and 3 inches tall.
Performance and Strength
The PSPVC6 features a 100-watt per-channel power output and is powered by a 120/240V voltage selector. With a frequency response range of 20Hz to 20kHz, this model has a minimum impedance of 8 ohms. This selector’s left and right commons are separated, making it compatible with a wide range of amplifiers. Autotransformer impedance protection is included in this product. It has a maximum amp input of 100W RMS and 150W AVG, with a maximum output of 18W RMS and 50W AVG per speaker.
Specifications
A one-year warranty is included with this speaker selection.
Pros
- Per-channel, 100 watts
- The impedance is 8 ohms.
- Frequency response: 20Hz to 20kHz
- 6 zones, a pair of sources
- Volume control on an individual basis
- Autotransformer impedance protection is included.
- The warranty period of one year
Cons
- When all six speakers are turned on at the same time, this device struggles.
4. ATM7
The ATM7 is another product from Optimal Speaker Design that will help you build a high-quality home audio system. Created by a network of engineers that deeply understand innovation and product development, the ATM-7 is a simple yet powerful speaker selector you’ll want at your house. This 7-zone selector allows you to control up to 7 pairs of speakers so you can play music in multiple rooms at the same time. In this model An infrared remote control is included. control, a perfect solution to your home audio. Moreover, you can easily program the remote control to your favorite universal remote, making this product even more enticing for audiophiles with smart homes.
Design and Construction
The OSD Audio ATM7 Speaker Selector is a dual-source speaker selector with the ability to operate up to seven pairs of speakers. The front panel of this device is made of black metal and controls the source (A or B), output channels, and the zone in/out button. There’s also a front-facing LED status display with a blue light that won’t be too bright at night. When connecting two ATM7 units in parallel, it features a master switch on both the front and back panels. An IR remote control with a backup memory capability is included with this model. The remote is simple to program and may be used with any universal remote control by simply entering the given code. The remote has a range of 10 meters. This device is 16.5 inches by 7.8 inches by 3 inches and weighs 7 pounds.
Performance and Strength
The ATM7 can handle up to 400 watts of electricity. It boasts exceptional sound distribution capabilities, enabling you to send an amplified audio signal to seven different zones and pick between two different music sources in each zone. This is a passive speaker selector with There isn’t any built-in impedance protection..
Specifications
In the United States, consumers are covered by a limited warranty for two years following the date of purchase. This is a classic speaker selection that works well with an impedance matching in-wall volume control to prevent the load from negatively influencing the receiver or amplifier.
Pros
- Handling 400W of electricity
- 7 zones, a pair of sources
- The front panel is made of black aluminum
- An infrared remote control is included.
- LED display panel
- Limited 2-year warranty
Cons
- There isn’t any built-in impedance protection.
- No Volume control on an individual basics
5. Niles HPS-6 Speaker Selector
For nearly four decades, Niles has been the premium home audio solution for consumers around the globe. They deliver innovative products that can improve the quality of home entertainment. If you are building a multi-room audio system, the Niles HPS-6 will help you stream your music from a single amplifier or receiver to six sets of speakers throughout your home. This model has an on/off control for each pair of speakers so you can manage them individually. Protected by impedance magnifying circuitry, you don’t have to worry about the safety of your receiver or amplifier, even when you’re driving all six pairs simultaneously.
Design and Construction
The Niles HPS-6 Speaker Selector is a single-source speaker selector that connects to six separate speaker pairs. It’s built with a tough all-metal chassis and Feet that don’t slip to keep it from scratching your furniture. The speaker selector’s stability is additionally ensured by the rubber feet. This variant has screwless connections that may be removed. Users should utilize 16- or 18-gauge wire, according to Niles. 14-gauge wire is suggested for wiring lengths more than 80 feet. It is not suggested to use a speaker wire greater than 14 gauge for the HPS-6 because the wire may not fit into the connections. This item weighs around 7 pounds and measures 17 inches wide, 2 inches tall, and 8.6 inches deep.
Performance and Strength
With a maximum power handling Each channel has a power output of 250 watts. The impedance is 8 ohms., the HPS-6 Speaker Selector is the perfect equipment to stream your music to multiple rooms at once. It has separate left and right ground paths for compatibility with all amplifiers, including bridged designs. However, this unit requires an amplifier that is compatible with a 4-ohm load. The HPS-6 is equipped with a protection circuit that safeguards your receiver or amplifier. It must be noted that this unit’s impedance protection is run in parallel. You can choose to have constant or selectable protection from the switch on the rear panel.
Specifications
A 10-year guaranteed warranty is included with this speaker selection. The warranty will be invalidated if any damage is caused by the use of a higher power receiver or amplifier. One HPS-6 speaker selector, a sheet of 72 self-adhesive room/zone labels, an installation and Operating handbook, as well as a warranty and registration card, are included with your order.
Pros
- Each channel has a power output of 250 watts.
- The impedance is 8 ohms.
- There are up to 6 speaker pairs available.
- Body made of metal
- Feet that don’t slip
- A switch controls the protection circuit.
- Limited 10-year warranty
Cons
- No Volume control on an individual basis
- The speakers are connected in parallel in this model.
6. SS-4 Speaker Selector
The Niles SS-4 allows you to distribute music to four pairs of speakers around your house from a single amplifier or receiver.
Design and Construction
Niles SS-4 Speaker Selector is a single source speaker selector with up to four listening zones. It has a rugged all-metal chassis construction and Feet that don’t slip. The rubber protection on the feet is intended to keep the unit stable and prevent it from scratching your furniture. This unit is designed with push-button controls to turn each pair of speakers on and off independently. However, it does not have independent volume controls. The SS-4 is equipped with four removable screwless connectors that can accommodate 14- to 22-gauge speaker wires. This setup makes it a lot easier for you to wire a lot of cables into the system. This unit weighs merely 2.6 lbs and measures 8.5 inches in width by 2 inches in height by 6.7 inches in depth.
Performance and Strength
This speaker selector has a Per channel, 100 watts power handling capability, and 200 watts peak. It has a frequency response of 20Hz to 20kHz and requires an amplifier that is compatible with a 4-ohm load. This unit is designed with separate left and right ground paths to provide compatibility with all amplifiers, including those with bridged designs. The unit is also equipped with selectable impedance-magnifying circuitry to prevent damages caused by overloading. You can activate the protection through a switch on the selector’s front panel.
Specifications
The SS-4 is backed by a Limited 10-year warranty from the manufacturer. Along with the speaker selector, you will get a sheet of 72 self-adhesive room identification labels, an installation and operation guide, as well as a warranty and registration card.
Pros
- 100 watts each channel, 200 watts peak
- There are four different listening zones.
- Frequency response: 20Hz to 20kHz
- Extremely light.
- Features selectable Circuitry for Protection
- Limited 10-year warranty
Cons
- Because the machine is so tiny, connecting the connections might be challenging.
- There are no separate volume controls built in.
7. Pyle PSS8 Speaker Selector
With almost 60 years of experience under its belt, Pyle is one of the leading manufacturers of high-quality audio equipment for advanced users. The company began by selling woofers, but its reputation grows more and more as consumers around the US used its products, and their scientifically-tuned woofers and drivers are now recognized everywhere. Pyle is now a household name, and it continues to make breakthroughs in the audio department. The PSS8 Speaker Selector is the number one speaker selector from Pyle. It has new and improved features that will let you play eight sets of speakers at the same time. Pyle’s products are made confidently with the highest quality so you can do some worry-free shopping.
Design and Construction
The Pyle PSS8 Speaker Selector is a single source selector that can connect your audio system to up to 8 independent pairs of speakers. Because it is a passive device that is powered by your audio, all you need to do is connect the cables. For those of you who want to construct your own home theater experience, the PSS8 is a good choice. Every zone has its own on/off button on this device. Speaker wires up to 14 gauge may be inserted into the terminals. The device is lightweight, weighing just 3.37 pounds and measuring 12.8 inches by 2 inches by 6 inches.
Performance and Strength
This speaker selector can handle 100 watts of power per channel. It requires speakers with a minimum impedance of 8 ohms. The unit has built-in Circuitry for Protection to prevent overloading. The frequency response range is 20Hz to 20kHz.
Specifications
The PSS8 Speaker Selector, like all Pyle products, comes with a one-year limited guarantee.
Pros
- Per-channel, 100 watts
- There are eight different listening zones.
- Frequency response: 20Hz to 20kHz
- Extremely light.
- A minimum impedance of 8 ohms is required.
- Limited guarantee of one year
Cons
- No Volume control on an individual basis built-ins
- It’s tough to connect wire with little connections that are so close together.
8. OSD Audio ISS6 Speaker Selector
If you’re looking for an easy and effective way to distribute music throughout your house or restaurant, look no further than OSD Audio’s ISS6 Speaker Selector. This cutting-edge speaker selector can be connected to up to six listening zones simultaneously. The ISS6 has specs that were researched and developed by US-based designers and engineers, which is why it is easy to use despite its advanced tech. For a quality sound experience, the ISS6 Speaker Selector is one of the best speaker selectors in the market.
Design and Construction
OSD Audio ISS6 Speaker Selector is a single source speaker distribution system that can disperse your receiver or amplifier’s signal across six zones. It is a passive device that doesn’t require power to operate, and it has a Design with a low profile that will easily fit into a cabinet or an equipment rack. It is designed with an individual on/off button for each listening zone, but it has no Volume control on an individual basis. The ISS6 has easy Phoenix connections that can be removed to help you avoid frustration when connecting speaker wires. The connectors can accept speaker wires up to 14-gauge. The unit weighs 4.45 lbs and measures 18.8 inches by 6.2 inches by 3.5 inches.
Performance and Strength
The power handling capacity of this speaker selector is 70 watts per channel. The sound quality is consistent, and an impedance protection feature is included. This circuitry enables your amplifier to safely power multiple pairs of speakers without overheating or causing damage. This unit’s protection feature can be turned on or off using the switch on the front panel. The ISS6 can handle 70 watts per channel when it’s turned on. It can take 140 watts per channel when the protection is turned off.
Specifications
A 5-year guarantee is included with the ISS6.
Pros
- 70 watts per channel, with a peak of 140 watts
- There are six different listening zones.
- Design with a low profile
- Lightweight
- Phoenix connections that can be removed
- Impedance protection may be selected.
- Warranty period: 5 years
Cons
- No Volume control on an individual basis built-ins
- Installing it was a little challenging.
9. Pyle Pro PSPVC4
The PSPVC4 from Pyle Pro is one of the brand’s most celebrated speaker selectors. This audio equipment can connect your receiver or amplifier to four pairs of speakers at the same time. Suitable for restaurants, home entertainment, and other multi-room use, this speaker selector from Pyle is a hassle-free audio solution for everybody.
Design and Construction
The Pyle PSPVC4 Speaker Selector is a pair of sources speaker selectors, meaning it can handle two stereo amplifiers. It has built-in volume controls that allow you to regulate the level of each pair of speakers without having to walk to each room. A knob with increments controls the volume. At the control panel, there will also be a master on/off switch. Up to four listening zones may be linked to this speaker selector. The machine will not overheat while in use thanks to its tough and sturdy housing design as well as the cabinet heatsink. Because this is a passive device that is powered by your audio, all you have to do to use it is connect it in. Speaker wires up to 14 gauge may be inserted into the terminals of this speaker selector. The device measures 16.9 inches in width, 3 inches in height, and 6.3 inches in depth and weighs 9 pounds.
Performance and Strength
With a power handling capability of Per channel, 100 watts, this speaker selector will allow you to play audio to four listening zones at the same time. You will need speakers with a minimum impedance of 8 ohms. The unit is also equipped with Circuitry for Protection to keep it running smoothly and protect the receiver or amplifier from overloading. This protection is already built-in so you won’t have to adjust it via switches. The speaker selector has a frequency response of 20Hz to 20kHz.
Specifications
Before being offered to the general public, the PSPVC4 is meticulously produced and properly tested. Pyle offers a one-year limited warranty on it.
Pros
- Per-channel, 100 watts
- There are four different listening zones.
- Frequency response: 20Hz to 20kHz
- a pair of sources
- Built-in Circuitry for Protection
- Limited guarantee of one year
Cons
- It’s a little difficult to set up.
- Because of the way the control is set up, it’s impossible to alter the volume in tiny increments.
10. Russound SS6.2
Founded in 1967 in New England, Russound was a company known for its ability to make the finest audio accessories on the market. Its early products include speaker selectors, volume controls, and other hi-fi solutions. Its reliable products help it build a positive reputation, and now Russound’s products are sold in over 100 countries. Now based in New Hampshire, the brand continues to design and manufacture various audio products that are easy to install and simple to use. For example, the SS-6.2 enables you to stream music through six different pairs of speakers and connect them to a stereo amplifier. For the best speaker selector synonymous with audio quality, high-quality performance, and long-term reliability, Russound’s SS-6.2 is the answer.
Design and Construction
The Russound SS6.2 Speaker Selector is a single-source speaker selector with six discrete listening zones. Spring-loaded speaker terminals are included in this audio equipment, allowing you to connect all cables fast and effortlessly. Speaker wires up to 12 gauge may be inserted into the terminals. In addition, the device is lightweight, weighing just 3.1 pounds and measuring 14.7 inches in length, 2.5 inches in width, and 10.3 inches in depth.
Performance and Strength
This speaker selection has a peak power handling capacity of 200 watts per channel and an RMS power handling capacity of 70 watts per channel. It has a Frequency response: 20Hz to 20kHz range. This device works with 8-ohm speakers and has a selectable safe connection to safeguard your amplifier or receiver. Impedance matching on or bypass are the two operational modes for the SS-6.2. The impedance matching feature, when turned on, will provide automatic overload protection for high-power amplifiers. This mode allows you to connect numerous speakers to an amplifier simultaneously securely. Meanwhile, you may choose bypass mode if you just have one set of speakers or remote volume control with an impedance matching capability. The overload protection mechanism is disabled in this mode.
Specifications
A 10-year parts and labor warranty is included with the SS-6.2.
Pros
- 70 watts per square meter, 200 watts peak
- There are six different listening zones.
- Frequency response: 20Hz to 20kHz
- Overload protection is configurable.
- Lightweight
- Spring-loaded terminals
- Limited 10-year warranty
Cons
- No Volume control on an individual basis built-ins
- Wire input connections are a little on the small side.
11. Monoprice 4-Channel Speaker Selector
Based in Brea, California, Monoprice is a company that is known for its stellar reputation in product excellence and customer service. Established in 2002, they now offer over 7000 affordable, quality electronics and audio accessories that will satisfy both professionals and casual audiophiles worldwide. Monoprice prides itself in selling premium products at a fraction of the market’s price with excellent speed and service. The 4-Channel Speaker Selector is perfect for those of you looking for no-nonsense equipment to stream music to four different rooms.
Design and Construction
The Monoprice 4-Channel Speaker Selector is a low-profile speaker selector that distributes your stereo audio signal to up to four different speaker zones. It has spring-clip connections that can support up to 14-gauge bare speaker cables (for a carrying capacity of up to 100 feet). If the lengths covered are less than 100 feet, however, 16- or 18-gauge wire may be used instead. With a weight of about 2.5 pounds, this gadget is very portable. Its tiny shape allows it to fit within a cabinet or on a shelf, measuring 8.5 inches by 4.4 inches by 1.9 inches.
Performance and Strength
An impedance protection circuit is included in this speaker selector. A switch on the front panel may be used to turn it on or off. Your amplifier is forced to see a steady load of at least 5 ohms when turned on, protecting it from harm caused by poor speaker loading. It’s possible to turn it off, but only if your selection is connected to an impedance-matching volume control device. When the protection circuit is enabled, the selector can sustain up to 70 watts per channel or up to 140 watts peak when the protection is removed.
Specifications
This 4-Channel Speaker Selector is backed by a Limited guarantee of one year from the delivery date.
Pros
- 70 watts per square meter, 140 watts peak
- There are four different listening zones.
- Selectable impedance Circuitry for Protection
- Extremely light.
- Wiring gauges of up to 14
- Limited guarantee of one year
Cons
- The feature of impedance protection is prone to failure.
12. TC-7212
The TC-7212 is manufactured by Technolink, an audio equipment company based in Taiwan. The company started its business by helping its customers trade audio and video accessories and various electronic products upon request. It continued until 1992 when Technolink began to produce its equipment to meet the competition in the market. Now, they have their main office in Taipei and a joint-venture in China to create all kinds of AV products to export overseas, such as to the North American and European markets.
Design and Construction
The TEC TC-7212 High Power Speaker Selector is a single-source selector with two listening zones. This audiophile-grade selector has top-of-the-line internal circuitry and VDE-approved silver-plated brass contact switches for superior sound reproduction. The outer body is comprised of durable, fashionable metal. Because each zone has one on/off switch, this gadget is straightforward. You may turn on each pair of speakers separately or all at once. With their gold-plated banana sockets, the terminals are opulent. They can take plugs or cables up to 4mm in diameter. The device is 10.5 inches in length, 5.3 inches in width (including the banana sockets), and 2 inches in height and weighs 2.68 pounds.
Performance and Strength
This speaker selector has RMS power of 200 watts of power handling. It is suitable for speakers with An impedance is 8 ohms. or above. The unit is equipped with impedance matching protection. The internal switching mechanism uses a combination of parallel and series wiring to ensure that your amplifier sees a minimum of 4-ohm load when you’re playing two pairs of speakers at once. With this speaker selector, you can drive multiple sets of speakers without needing any external impedance matching devices.
Specifications
The TC-7212 comes with many blank, pre-printed room labels that may be used to designate each speaker pair’s position conveniently.
Pros
- RMS power of 200 watts
- There are two listening zones.
- Impedance matching circuitry built-in
- The banana sockets are gold-plated.
- Extremely light.
- Include room labels that have already been produced.
Cons
- No Volume control on an individual basis built-ins
13. AVX Audio
AVX Audio is brought to you by AV Express, an online retailer based in Ohio, U.S.A. This company has been providing various home audio and video products since 2003. Its 8-Zone Speaker Selector is the perfect multi-room audio equipment you can get. It gives you access to eight different listening zones. It is the simplest and easiest selector to install to increase the entertainment value at the venue of your choice.
Design and Construction
The AVX Audio 8-Zone Stereo Speaker Selector Switch is a single source speaker selector. It enables you to send an amplified stereo speaker signal to eight different listening zones. It has on/off buttons, allowing you to switch on only one, two, or eight pairs of speakers as desired. Because it is a passive device, it is powered by your receiver or amplifier. Heavy-duty speaker connectors on the back of the device can accept up to 14-gauge speaker cables. In addition, it comes with a spring-loaded compression connector for simple wiring and long-lasting attachment. This item measures 17 inches by 2 inches by 4 inches and weighs 4 pounds.
Performance and Strength
When impedance protection is turned on, this speaker selection produces 75 watts per channel and 150 watts per channel when turned off. The switch to turn on or off the impedance protection is located on the front panel. Regardless of how many pairs of speakers are being utilized, this precaution exists to prevent your amplifier from reducing the impedance too low. The load on your amplifier will stay at 8 ohms even if all eight-speaker pairs are switched on simultaneously.
Specifications
Cave Controls in-wall volume controls are compatible with this 8-Zone Stereo Speaker Selector Switch. It’s simple to set up and comes with a 5-year limited guarantee.
Pros
- 75 watts per channel, 150 watts peak
- There are eight different listening zones.
- Impedance protection that may be chosen
- Lightweight
- Speaker wiring with a gauge of up to 14
- Limited guarantee of 5 years
Cons
- Spring connections that are too weak
- No Volume control on an individual basis built-ins
14. Pyle Pro PSS4
The PSS4 is a part of the PSS collection from Pyle Pro, a division of Pyle that works with various audio equipment and solutions. It can play four pairs of speakers at the same time. This selector is most suitable for multi-room parties, a restaurant, and other residential or commercial use.
Design and Construction
The Pyle PSS4 Speaker Selector is a four-zone single-source audio system. The switches on the front panel may be used to turn each zone on or off. This selection works with many amplifiers, including Pyle, Sony, Panasonic, Yamaha, and many more. Because it is a passive device powered by your audio, all you have to do is connect it and turn it on. This device is 7.5 inches broad, 2 inches tall, 4.7 inches long, and weighs 2 pounds.
Performance and Strength
This speaker selector can easily handle up to 100 watts per channel. It works with speaker systems with a minimum impedance of 8 ohms. This unit is equipped with a selectable Circuitry for Protection that will prevent the amp from being damaged by low impedance. It has a frequency response range of 20Hz to 20kHz.
Specifications
A one-year warranty is included with this speaker selection.
Pros
- Per-channel, 100 watts
- There are four different listening zones.
- Frequency response: 20Hz to 20kHz
- Impedance protection that may be chosen
- The warranty period of one year
Cons
- No Volume control on an individual basis built-ins
- Multiple sets of speakers cannot be played at the same time.
15. Theater Solutions
Theater Solutions is brought to you by Goldwood, a manufacturer of high-quality audio since 1991. Goldwood’s mission is to bring the highest quality, most affordable audio products to consumers everywhere. They sell directly to the consumer, cutting out the middle man that often makes the price of products rise. The team at Goldwood has extensive audio and retail backgrounds under the belt, so you as a consumer can relax and be free from any worry as you will get the perfect solution to your audio needs. The TS6 is a speaker selector that can stream music to up to six different pairs of speakers. Theater Solutions’ TS6 might be the right choice for a simple selector that will do the job.
Design and Construction
The TS6 Speaker Selector Box by Theater Solutions is a passive single-source speaker selector that can connect to up to six pairs of speakers. The control panel’s switches may be used to activate one or all zones at the same time. This device incorporates a steel casing with rubber feet for stability and scratch resistance. The terminals include a spring-loaded mechanism and accept 14- to 22-gauge speaker cables. This item weighs 3 pounds and is 17 inches long, 4.8 inches broad, and 2 inches tall.
Performance and Strength
This speaker selecting box may handle up to 300 watts per channel. It includes amplifier impedance protection, which can be controlled through the single pair direct button, and it works with speakers with impedances ranging from 4 to 16 ohms.
Specifications
The TS6 speaker selector is designed and built in the United States and comes with a lifetime guarantee against the manufacturer’s faults. You must, however, register your item within 60 days after purchase. Your order includes one passive selector box, an instruction manual, one package of 500 feet of 14-gauge speaker wire, and pre-printed zone identification labels.
Pros
- Each channel has a power output of 300 watts. RMS
- There are six different listening zones.
- Impedance protection that may be chosen
- Extremely light.
- 14-gauge speaker wire is included.
- For manufacturing flaws, there is a lifetime guarantee.
Cons
- No Volume control on an individual basis built-ins
- Installing it is difficult.
Related Tags
- 4 zone speaker selector with volume control
- 2-channel speaker selector with volume control
- Niles speaker selector
- wifi speaker selector
- HiFi speaker switcher