Building your own computer is not as easy as it sounds. A computer building simulator would probably teach you a few things, but it’s a task that requires a lot more than just putting the pieces together the way you think is best. Distractions or lack of tools and resources can make things pretty hectic. On the other hand, there are mistakes that you can easily leave behind, but others can cost you dearly.
This guide shows you the tools and resources you need to build a PC without causing damage or electrocution, which is not pleasant at all, even if the word sounds like that.
You will need certain tools, even if the manufacturers have made assembly easy at any price because these tools can be useful in any situation and are absolutely necessary.
You first need an ordinary screwdriver or several, depending on the variety of screws you can make. It is good to have more screwdrivers in your inventory, but if you chose one, it would be a Phillips screwdriver because most screws found on computers are Phillips screws. If you can, try to buy a Phillips screwdriver in both sizes, short and long, to make it easier in another situation where space could be the main problem.
Provide an additional light source. Yes, all the work on your PC must be done in a lighter room/room, but there may be different angles in the housing where conventional light sources may be unnecessary. In this case, a flashlight or something else will help you to patch up your drawing without losing the screw in the darkest corner and never being able to find it again.
A pair of pliers must be available for all cases. Because you do something so detailed and mechanical, a tool like pliers can be useful for obvious reasons. For example, if the screw head is removed, use the pliers gently and sensitively to solve the problem. It can also be used to cut excess clamps if your clamp does not have a wire cutter in the kit. A pair of tweezers can also cover the absence of tweezers.
Lint-free substance or compressed or vacuum air
All of this can be used in different ways and can be used effectively in its own way to remove dust, as the removal of dust accumulated or deposited in deep corners of the PC or its components are necessary to prevent overheating or other such problems. Of course, dust is still not suitable for construction, but it can also spoil your appearance if you choose to run parts through the glass.
Cable ties are necessary to build an organized installation and give it a first-class professional look. Otherwise, unattended cables and lack of organization can make your PC look confusing, disrupt the whole process, and make it very difficult to deliver or install a particular component. You can use or use zip or twist tapes, and zip tapes can only be used once. So make sure you use them where no other activity is needed, while the twists are very elegant, almost invisible connections that can be removed to redistribute the cables.
They contain tools that, while not as necessary as the basic tools, can greatly improve the assembly process of your PC and help you achieve the most reliable installation of all components.
Electric shocks can be avoided if you are careful, but it is better to play it safe if you are not sure. Antistatic devices, such as the antistatic wrist strap, can help prevent electric shocks, damaging the sensitive parts of the computer you come into contact with.
It would also be advisable to add a magnifying glass to the inventory since images printed on computer parts are often very small and difficult to read. The magnifying glass makes it bigger and easier to read, so you can adjust everything. You can also zoom in on details and contacts to understand how to adjust them correctly without damaging the contacts. You can also get a cheap jeweler’s sloop to do the work and more clearly identify damaged chains or links.
You can put all your power or extra parts in it to prevent them from being scattered anywhere on the floor; it can also help carry all those little screws that might easily get lost. The spare parts bin can be any bin that can do this kind of work, it doesn’t have to be a magnetic metal bin, and if it is, it’s obviously much more practical.
Immediately after assembly, you should have your own thermal paste available to use during assembly without having to dismantle things later if the heat damages the parts. In general, parts that need thermal paste are already provided with the necessary thermal paste, but if it is dry or not fresh and of poor quality. Therefore, just the paste you have already applied and bring your own very little brings great performance; never overestimate.
These are the most important tools and resources you may need if you decide to create your own PC soon. We also advise you to keep extra tools, parts, and screws if you need them. Most manufacturers strive to make installations simpler and easier, to the point where they can do it almost without tools. However, many products on the market still need all this to make a successful installation.
pcpartpicker, how to build a PC, no 2 Phillips screwdriver, basic no. 2 Phillips screwdriver, no 2 Phillips screwdriver size, no 2 Phillips screwdriver magnetic, screwdriver for pc building Reddit, what size screwdriver do I need to build a PC, 1. The first thing you need to do to prepare is to gather the tools you need to complete the build. Preparing the materials ahead of time goes a long way. Before picking out components, you should have a case — or, at least, a case size — in mind. The main thing to keep in mind when picking a case is where you’ll put the computer. Your PC’s final location will dictate how big you can (or cannot) go, and it will also help determine whether various premium case features are worth splurging on. For example, you probably don’t want to pay for a tempered glass side panel if the computer is hidden under your desk. Cases typically come in three sizes: Full-tower, mid-tower, and mini-tower. These are very general categories. Now it’s time to get your components together. This step can be as hands-on or as hands-off as you like; you can thoroughly research each individual, 1. The first thing you need to do to prepare is to gather the tools you need to complete the build. Preparing the materials ahead of time goes a long way, too, 2. Before picking out components, you should have a case — or, at least, a case size — in mind. The main thing to keep in mind when picking a case is where you’ll put the computer. Your PC’s final location will dictate how big you can (or cannot) go, and it will also help determine whether various premium case features are worth splurging on. For example, you probably don’t want to pay for a tempered glass side panel if the computer is hidden under your desk. Cases typically come in three sizes: Full-tower, mid-tower, and mini-tower. These are very general categories, 3. Now it’s time to get your components together. This step can be as hands-on or as hands-off as you like; you can thoroughly research each individual parts needed to build a gaming PC, build a gaming pc online, how to build a gaming pc: step-by-step, simple gaming PC, cpu for gaming PC, processor (CPU), safety tips when building a computer, precaution while using computer, computer building gloves, asus motherboard installation, how to ground yourself PC, safety precautions in assembling computer, computer materials list, first computer materials, computer material name, materials used in wall clock, materials used in ladder, materials used in shoes, how to build a pc for beginners, computer assembling parts price list, what is compatible with my computer, what type of ram is in my laptop, how to assemble a computer step by step pdf, what to buy first when building a gaming PC, pc building kit tools,high quality computer tools, best computer repair tool kit 2019, best it tool, best network tool kit 2019, computer build tool, pc building tool kit, tools needed to build a PC, tools needed to build a pc reddit, pc part picker, build your own PC, supplies for building a computer, pc building tool kit reddit