The Corsair Airflow PC case is a mid-tower chassis with an innovative design that promises to keep your components cool. The 7000D comes in multiple colors, and the black edition offers up some RGB LED lighting for extra customization.

The Environment

This, like the 7000D’s more minor brothers, looks fantastic from every aspect, despite its size. The 7000D stands 600mm tall, 550mm long, and 248mm deep, which puts it 30mm higher than the Phanteks Enthoo 719 full-tower, more significant than the 5000D (520mm x 520mm x 245mm), and dwarfs the 4000-series. The 5000 series felt huge for a mid-tower and had plenty of capacity, even for complex water cooling loops. Still, the 7000D goes a step beyond and is aimed at hobbyists eager to make something beautiful.

Corsair 7000D 2

It would not be easy to distinguish it from the other versions starting with the front if it weren’t for its size. The 7000D model has a perforated mesh front panel instead of tempered glass, distinguishing it from the 7000X. We also have two 140mm AirGuide fans, basically branded airflow fans that provide reduced noise levels due to higher CFM. While we’d like to see Corsair put more fans at the front, these are in the best place and perform an excellent job of keeping internal temperatures down.

Corsair 7000D 3

The metal mesh top layer may be removed and cleaned, revealing a fabric mesh filter below. This mesh filter is a feature I like that goes across the whole iCUE series of Corsair’s current PC cases. For example, the Corsair 7000D is a beautiful alternative for sheer Performance. Still, I’d guess most builders who choose this series of patients are seeking water cooling, and the 7000X variant’s enhanced aesthetics would be my preferred pick. If you don’t want to sacrifice airflow, you can replace the fans with some RGB 140mm versions and create a distinct appearance at the front.

Corsair 7000D 4

The Rear

The rear is almost similar to the 5000 series with more PCIe slots. You have eight horizontal expansion slots and three vertical expansion slots in the conventional settings. Because the 7000D is a little more prominent alternative, you can also utilize the accompanying PCIe bracket to gain a secondary vertical mount position. The stand easily replaces the slot covers, allowing you to install your computer vertically, closer to your motherboard, and away from the tempered glass panel.

Corsair 7000D 13

While the 7000D and 7000X have the same number of fans, Corsair has pre-installed a 140mm fan at the back to provide out-of-the-box airflow, which we will address later in the Performance section.

Corsair 7000D 17

There’s not much more to say about it save for the exposed hinges. The rear hinges provide wide-swinging panels with a 180-degree opening. The panels can be lifted off, but to ensure the massive, heavy doors are as secure as possible, they have replaced the tool-free nature on the more minor cases with a screw.

The Side

The 7000D’s side reminds me of the Phanteks Enthoo 719, but that’s only because From the Inside seems to be enormous through the glass. The TG panel is thick and substantial, and it comes with an opaque border that neatens things up beautifully. This case appeals to me because of the total unbroken view inside, and I can easily envision some fantastic loop ideas for this case soon.

Corsair 7000D 1

The 7000D’s rear panel is almost similar to the more minor incarnations, except for a comprehensive vented portion towards the front that allows for installing a third radiator mounting position. There is a lower-quality dust filter behind the vent than the one in front, but it works well enough and is simple to remove and clean, so no complaints.

Corsair 7000D 5

The introduction of a second panel on the rear panel is my only criticism. Another appears as you open the door, which looks lovely but adds nothing except unneeded weight. You may delete it if you like, but it’s unnecessary; it’s simply worth pointing out the single flaw I see in the design.

Corsair 7000D 6

The Top

The 7000D’s top is gorgeous, with the same aesthetics and utility as the front panel. On top of a dust filter, we have the same perforated mesh screen, with a detachable radiator/fan mount underneath it. Many people will like the detachable bracket since it makes it much simpler to install radiators by just releasing the thumbscrews, pulling out the frame, installing the rad, and then dropping it back in.

Corsair 7000D 18

The I/O is likewise located at the top, and it consists of:

  • Button of Strength
  • Button to Reset
  • 4 USB 3.0 ports
  • 1 Type-C USB 3.1
  • Audio Input/Output

This is a good amount of connection for a front panel, although the case comes with two USB 3.0 cables, so be sure your motherboard can handle them.

From the Inside

There aren’t many surprises here if you’re acquainted with the 5000-series, mainly extra space, and rad/fan support. Of course, this model’s roomy inside is all white and immaculate, with a highly logical structure. The case is also available in an all-black version, but I have to confess that the white version is my favorite. The whole topic seems to be well-made and well-designed. There are no visible flaws or misalignments, merely excellent quality.

Corsair 7000D 2 1

The 7000D’s front panel has room for four 120mm or three 140mm fans and a radiator up to 480mm in length. That’s a lot of space, and with that much space just behind the front panel, you can store some extremely thick rads in there and a reservoir. In addition, you receive an adjustable bracket, much like the smaller models, that enables you to swap up setups and vary the appearance and usefulness of your case.

Corsair 7000D 8

The cable management cover and another mounting point for fans or a radiator are located towards the rear of the interior. You can add four 120mm fans or a radiator up to 480mm after removing the cover. However, no 140mm alternatives will fit. This provides aspiring builders with even more options for cooling their components, which I like.

We have more area at the top of the cabinet for a giant radiator. The 7000D’s top accommodates three 120mm or 140mm fans and a rad up to 420mm in length. Because of the case’s increased size, another thick radiator may be installed, giving plenty of area for your CPU power to be connected.

Corsair 7000D PC case & iCUE H170i ELITE CAPELLIX Liquid CPU Cooler

A thick, high-quality PSU shroud with a hole towards the bottom of the case allows a little additional air into the basement. The shroud offers three sites for installing SSD brackets and two positions for vertical installation; however, the bracket must be purchased separately. Corsair has incorporated an acrylic panel above the cutout where you may wish to put an LCD or see a PSU with a display, and the cutout holes towards the rear of the shroud are big and easily located for best cable management.

Corsair 7000D 12

There’s not much more to say about the inside except that there’s room for a 120/140mm radiator at the back of the case.

The Panel on the Back

The cable management system, or RapidRoute, is one of the standout features of Corsair’s newest cases. It’s a feature that you’ll find on a lot of premium cases, independent of brand, and it makes wire management a little simpler for confident builders. However, to attain cable management nirvana, I believe you need a combination of Corsair’s system and cable ties; as you can see from the photos, utilizing both look relatively neat.

Corsair 7000D 8 1

The cable management system comes with many velcro straps and can be removed fully if desired. However, I leave the central section in place while removing the smaller brackets to create room for my fan controller. The three tool-free SSD installation brackets are located towards the bottom of the page. These brackets may be relocated to the inside of the casing or removed entirely, depending on the configuration you prefer.

Corsair 7000D 19

Because the two integrated HDD drive cages are detachable, we have enough place in the basement for a PSU up to 225mm in length. In addition, each cell can hold three additional HDD/SSDs, giving you plenty of storage choices.

Performance

Unsurprisingly, the design and roomy interior make this a component’s dream. There is enough airflow circulating through the 7000D thanks to the AirGuide fans. I developed a system with high TDP components to test the case. We have an i9-10900K processor and the RTX 3080 Ti GPU. These two may get rather hot when used together, so I added the Corsair iCUE H170i Elite Capellix AIO for CPU cooling.

Intel i9 10900K RTX 3080 Ti

As you can see, after around 30 minutes of stress testing, both the CPU and GPU were operating at relatively low temps. More crucially, the ambient temperature inside the case scarcely climbed, climbing by roughly 9 or 10 degrees, due to the case’s ventilation design.

Apart from its thermal performance, the 7000D is exceptionally simple to install because of its small size, tool-free design, and modularity, which removes all of the stress from the procedure. You have a lot of areas to work with, the layout is sensible, and the fact that you can remove and add brackets makes it a joy to work with.

Final Thoughts

Both the Corsair 7000D and 7000X are stunning as the whole series is, but the 7000D Airflow takes the cake in terms of performance. This is a high-end full-tower, and as such, it comes with a hefty price tag. To be fair to Corsair, it is reasonably priced, and the quality is unquestionable, but it falls short of the Phanteks 719 in terms of absolute value, which might be a concern.

On looks alone, I know many people would prefer this model and enjoy making unique-looking constructions inside, but I still like the Phanteks 719 for a super tower. Regardless, I can’t suggest the 7000D highly enough; it’s a great follow-up to the 4000 and 5000 series cases and offers another great alternative. Of course, I’ve water-cooled in the 5000X, and there’s enough of the area in that instance for a complete loop. Still, if you’re thinking about anything more complex, like multiple reservoirs, the 7000D’s additional space could be appropriate.

Frequently Asked Questions

Are Corsair cases good for airflow?

A: No, this is not true. While it does provide a good amount of airflow from its vents, the case doesnt have much capacity for these to be utilized.

What Corsair case has the best airflow?

A: You should consider a liquid-cooled Corsair case for the best airflow and cooling. This allows for more efficient ventilation of heat from your PC components and better overall performance in most cases.

Is Corsair a good brand for cases?

A: Corsair is an excellent brand for cases. They are arguably the best option in terms of quality and design.

Related Tags

  • corsair 7000d airflow price
  • corsair 7000d airflow manual
  • corsair 7000d dimensions
  • corsair 7000d RGB
  • corsair 7000d weight
You May Also Like

Our 5 Best Laptop Mouse in 2022

In 2021, laptops will be more potent than ever. We’ll also see…

Top 15 Best Entertainment Centers in 2022

The entertainment industry is thriving with lots of exciting activities and venues.…

Arc’teryx Cerium LT Hoody Review

The Cerium LT is an all-around winter running jacket that can handle…

JOBY GorillaPod Flexible Camera Tripod Review

The GorillaPod Flexible Camera Tripod is a flexible tripod that bends and…