NZXT H510 is a case that offers your PC an open-air experience with the latest, high-end hardware. It features multiple USB 3.0 and HD audio connectors for easy access to peripherals like headphones or external hard drives while maintaining a sleek design.
The H-series PC cases from NZXT are among the most highly acclaimed in the PC building community. These stylish cases are noted for their outstanding build quality, simplicity of assembly, and affordability.
We’ll be looking at the NZXT H510 today, which is officially the “base” model but is far from it. Instead, the H510 is the “middle child” of the series and is simply an improved H500 with USB Type-C. This mid-tower falls between NZXT’s bigger H710 and mini-ITX H210 cases, making it one of the company’s most popular solutions.
The NZXT refresh comes in various colors, special editions, and alternate models, with the more costly “Elite” and I variants including RGB fans and an improved fan controller. Anyway, let’s take a closer look at what makes this situation special.
|Measurements (mm)||460 x 428 x 210 (L x W x H)|
|Materials||Tempered Glass, SGCC Steel|
|Available colors||Matte Black, White, and Black/Red are some of the colors available.|
|I/O panel in the front||USB 3.1 Gen 2 Type-C x 1, USB 3.1 Gen 2 Type-A x 1, Headset jack x 1|
|Slots for Expansion||7+2|
|Bays for driving||2+1 x 3.5″ 2+1 x 2.5″ 2+1 x 2.5″|
|Support for motherboards||ATX, Mini-ITX, MicroATX|
|Cooling (front, top, and back)||2x 140 or 2x 120mm / 1x 120mm / 1x 140mm / 1x 120mm / 1x 140mm / 1x 120mm|
|GPU’s maximum length||381mm without a front watercooler, up to 325mm with a front watercooler|
- All-steel structure, tempered glass, and PSU shroud
- Two Aer F120mm fans are already fitted.
- Radiator bracket that can be removed.
- Brilliant Device V2 is included in the “Elite” and I editions.
- Two RGB Aer fans are included in the “Elite” version.
Inside the Container:
- NZXT H510 is a PC case by NZXT.
- Splitter for audio and microphone jacks
- User’s Guide
The new NZXT H510 casing has the same streamlined form as its predecessor, with a matte black grainy texture. Of course, this texture attracts dirt and has a hard time hiding scratches, but it’s a lot better than the shiny option that many cases come with. In addition, this version is a sleek featureless panel that exudes luxury, while the Elite model has a tempered glass front to show off the accompanying RGB fans.
We see a fan vent at the back for one of the included 120mm fans, which is as big as you can go in the fan department here. You get your standard seven Slots for Expansion at the back plus a double slot for vertical GPU mounting if you remove the pre-attached bracket.
Aside from that, there isn’t much to say about the back, save that the quality feel is still there.
Despite its simplicity, you can tell you’re dealing with an NZXT case thanks to the crisp box-like corners and a short slither of visible ventilation. The bottom quarter of the tempered glass panel is part of the PSU shroud, leaving the glass fully independent from the rest of the chassis.
Once you get past the thumb screws, which, unfortunately, sliced my flesh, the panels come off quickly, so keep your screwdriver ready. Because of the push-to-lock mechanism, the tempered glass side shouldn’t easily slide out, but be cautious afterward! The front of the rear panel had a little bit of ventilation, where the negative pressure arrangement would take air from.
The top of the case is designed in the same minimalistic style as the rest of the casing. With just a single 120mm fan vent visible at the back of the top part, this is a design decision I admire. Unfortunately, the only issues I experienced with the H510 were at the top of the casing. In contrast to the rest of the case, which pops in and out, the back fan vent has a ridiculous amount of flex. Now, it only moves when I push it, so don’t be put off, but I had to discover a flaw in the otherwise flawless H510.
The second problem I experienced was with the front panel I/O ports, or their lack thereof.
These are the following:
- Button of Strength
- One × Type-A USB 3.1 Gen1
- 1 Type-C USB 3.1 Gen2
- 1 x Audio Jack for Headset
Now, I could argue that this is enough ports on the front, and it also fits nicely with the case’s general minimalist design. NZXT isn’t cheap; you get a lot for your money with the H-series, including an audio jack splitter, but I would have liked to see a few more ports here.
From the Inside
Nothing in this update will surprise you if you are acquainted with the predecessor, the H500. Regardless, the inside has a sensible arrangement and, at least on the surface, a remarkable amount of space for a mid-tower.
On the NZXT cases, there are no cuts with rubber grommets; instead, there is a comprehensive cable routing hole neatly concealed by NZXT’s signature cable bar. If you pick a model that isn’t jet black, the cable bar will usually be a contrasting color, which is an aesthetically pleasing aspect. However, it isn’t just about appearances here. The cable bar covers the wires and serves as a place to install your water-cooler reservoir. This cable bar may also be removed if you require more room inside the case. Again, NZXT did a fantastic job.
In the H510, you can install motherboards ranging from Mini-ITX to ATX. However, I noticed that ITX boards seemed a touch out of place, although it isn’t the largest enclosure. Furthermore, since the inside is exposed, don’t anticipate a crazy HDD arrangement in this scenario.
We find a fan bracket in the front that can be removed if you want to modify the airflow layout or install a radiator. This only makes the installation process more manageable, mainly when using an AIO cooler. The front is the only place where 140mm fans can be installed, and there is also the capacity for a rad up to 280mm.
The standard PSU shroud can be found at the bottom of the chassis, and it performs several intriguing functions in addition to concealing the nest under it. The perforated area of the shroud is one of three locations where you may install the res if you intend on water-cooling the system. There’s also a cutout for your GPU power, which saves you some space at the rear and keeps the inside of the construction looking tidy.
The Panel on the Back
The supplied cable management brackets sprinkled across the rear of the H510 are the key talking point. They are probably unimportant to experienced builders, and if you are one of them, you can eliminate them. That said, I could wire manage the PC without using any tools, and I wouldn’t need a single cable tie if I wanted to speed up the procedure. The method works behind the scenes and invites novice builders to experiment with wire management. Therefore, I’m a fan.
The second central talking point is the fantastic choice to finally combine all FP cables into a single connection. This is because motherboards standardize the FP, which is excellent news for sausage finger builders.
Other features include two 2.5″ SSD mounts that are identical to those found on the H500 and a plethora of cable tie points that eliminate the need for tie bases.
Finally, the HDD cage is visible at the bottom area of the rear, concealed as it should be. The HDD cage may, of course, be shifted forward or backward or removed altogether.
NZXT cases aren’t short on features, but they generally provide PC builders with a high-quality chassis that makes the construction process more straightforward. In addition, the H-series casings are among the cleanest-looking devices on the market, and the H510 has the same charming features as the H500.
Clean Design – The sleek H510s look is planned and clean. The professional exterior looks fantastic when paired with the unbroken tempered glass panel. Furthermore, the cable bar and PSU shroud contribute to the interior’s clean appearance, giving even unskilled builders something to be proud of.
Airflow — The casing is well-designed, and the two 120mm Aer fans that come with it operate in tandem to provide excellent airflow. It’s worth mentioning that with an airflow set up like this one out of the box, dust may accumulate in unsightly gaps throughout the chassis, so be prepared. However, there are plenty of detachable dust filters and a bracket to make installing a radiator a breeze.
USB-C — This sort of connectivity is becoming more prevalent in cases these days, but when you consider the price, it’s still another feature that makes this a great deal. Because the Type-C port is on the front panel, you won’t have to dig the case out from behind your desk to attach your phone or a new gaming headset.
The whole NZXT H510 is crammed with features, and it owes its popularity to its well-thought-out design; expect a long line of updates to this classic.
- Excellent aesthetics
- Support for water cooling
- Option for installing the GPU vertically
- It’s pretty user-friendly.
- Excellent thermal and acoustic properties
- Constructed well
- The Elite edition is exorbitantly expensive.
- The airflow configuration pulls dust to unwelcome locations.
- Screw fittings are too tight.
- Front I/O ports are limited.
So there you have it: the ins and outs of the NZXT H510, one of the cleanest-looking cases on the market. The “Elite” version, which adds a second fan and another tempered glass panel, seems costly to me, but they are each their own.
Like its predecessor, the H510 is a solid case, it’s been Constructed well, and reliable materials have been used throughout. If you are going to be adding an AIO or extra fans, you will definitely want to consider the H510i. From water-cooling to budget builds, everything will look fabulous inside this NZXT case, it is genuinely a mid-tower for all.
The NZXT is ideal for novice and expert builders, but what will your next case upgrade be? Go to the WePC community and tell us about the next enclosure for your construction.
Frequently Asked Questions
Is NZXT H510 have good airflow?
A: NZXT H510 has excellent airflow to support high-end graphics cards.
Are NZXT cases good?
A: NZXT cases are outstanding and durable.
- nzxt h510 airflow
- nzxt h510 prebuilt
- h510 case
- nzxt h510 elite
- nzxt h510i